1979-93 Ford Mustang Moser 28 Spline, 5 Lug Axles w/ 94-04 Flange - Fox Body by Moser

Mustang Moser 28 Spline, 5 Lug Axles w/ 94-04 Flange (79-93)


Details   |  Description   |  Customer Photos   |  Reviews
Mustang Moser 28 Spline, 5 Lug Axles w/ 94-04 Flange (79-93)

Complete your Fox 5-Lug disc conversion with these Moser 28 spline 5 lug axles with SN rear flange!

Item #MOS-A882851SN
MPN# A882851SN

Everyday Low Price: $259.99

In Stock
Ships tomorrow!

FREE SHIPPING!

Add to cart

Get it by Christmas! Order by December 16, 2016 @ 3pm CT

Benefits

  • Stronger Than Stock
  • Great Upgrade For Street/Strip Action

Features

  • Forged Steel Construction
  • Fits 8.8" Rear End
  • 28 Spline
  • 94-04 Style Flange
  • Made In The USA

What's in the Box

  • (2) 5-Lug Moser Axles

Made in the USA

Product Description

These axles retain the stock track width, but have the SN95 flange for the rear disk conversion. Perfect for use with our LRS-2100A & LRS-2100C rear disk conversion brackets!

Heavy duty axles from Moser Engineering seem to be one of the best replacement axles for a Mustang. Among the other benefits, these axles are constructed of forged steel, non-tapered with hardened & ground bearing seats, and feature machined c-clip grooves. They are the perfect upgrade for your street/strip Mustang and will stand up to hard launches at the track!

Note: Mustangs with serious power should use 31 spline axles with an aftermarket rear differential.

**Requires .625 knurl press in axle studs**

**Requires .625 knurl press in axle studs**


Fitment Note
These 28 spline axles will fit both 7.5" rear ends and 8.8" rear ends.

Axle Fitment Disclaimer:
The axles included in this purchase will not fit 1984-1986 SVO or 1987-1993 Saleen Mustangs.


See what our customers have to say about this product!
Check out customer reviews.


Customer Photos (1)



Product Reviews (5)


4.6
out of 5 stars
4.5 stars
5 reviews
5 stars    4
4 stars    0
3 stars    1
2 stars    0
1 star    0

100%
OF CUSTOMERS
RECOMMEND THIS PRODUCT
5 of 5 REVIEWS
RECOMMEND THIS PRODUCT
5 of 5 REVIEWS


3 Stars   Nice parts, but...
By on 11/4/2015
The quality of machine work and finish is exemplary but don't expect this to be a simple bolt-in part.The axles should be installed only by a qualified mechanic.

The axles I received fit beautifully until I tried to install the differential lock-pin: The axle ends are on the order of 0.004" too long. I'm okay with it because I can have the ends machined; however, this means that if an inexperienced or unknowing gear-head is lucky enough to get the pin in with a friction fit, the axle ends will provide no room for the hot parts to expand, and that will cause undue stress at the axle retainer groove. At the very least, the metal parts will "wear-in", shortening the life of all the moving parts.

On the other hand, due to factory tolerances in the 8.8" axle housing, the next set of axles Moser puts out may fit the next person's axle housing just fine.

This part needs a disclaimer stating that additional machine work may be required and that installation should be accomplished by a qualified mechanic in a shop with machine tools with the ability to properly trim the axle ends.

Yes, I would recommend this item to a friend!


Was this review helpful to you?

5 Stars   Perfect fit, great look
By on 6/30/2014
Perfect fit to complete my sn95 cobra brake conversion on my foxbody would really recommend to any foxbody owner

Yes, I would recommend this item to a friend!


Was this review helpful to you?

5 Stars   Nice quality
By on 2/16/2015
Have not installed yet but looks like a high quality axle. Very pleased with late model. Fast shipping!

Yes, I would recommend this item to a friend!


Was this review helpful to you?

5 Stars   Great fit
By on 8/11/2014
Just got done with job fit just like stock thank you

Yes, I would recommend this item to a friend!


Was this review helpful to you?

5 Stars   Perfect for doing 5 lug swap!
By on 3/28/2016
These axles work great for five lug conversion I also used Moser Axle Studs Part #8250 they work perfect together so you can still use stock lug nuts.

Yes, I would recommend this item to a friend!


Was this review helpful to you?


Vehicle Applications

Ford Mustang - 1979 (79) - 1980 (80) - 1981 (81) - 1982 (82) - 1983 (83) - 1984 (84) - 1985 (85) - 1986 (86) - 1987 (87) - 1988 (88) - 1989 (89) - 1990 (90) - 1991 (91) - 1992 (92) - 1993 (93)


About This Brand


Moser
Moser - Fast, Strong, Affordable!
Moser Engineering, founded in 1982, manufactures aftermarket performance rear end components for various Mustang & Lightning applications. Located in the ‘Heartlands of America’ in the modest town of Portland, Indiana, the company prides itself in its’ ability to supply quality American-made products, at an affordable price, with an industry-leading two-day turnaround. They are widely known for their performance rear axles and differential components. Shop LatemodelRestoration.com to get Moser 4 lug, 5 lug, 28 spline, and 31 spline axles for your Foxbody, SN-95, New Edge, or S197 Mustang.

Look for Similar Items by Category

Ford Mustang Parts » Mustang Drivetrain » Mustang Rear End & Axles » Mustang Axles
1979-1993 Mustang Parts » 1979-1993 Mustang Drivetrain » 1979-1993 Mustang Rear End & Axles » 1979-1993 Mustang Axles
Ford Mustang Parts » Mustang Wheels » Mustang Fox Body 5 Lug Conversion Kits

Products by Vehicle