SHOP

1979-04 Mustang SVE Aluminum Driveshaft - 28 Spline by SVE Products ®


1979-04 Mustang SVE Aluminum Driveshaft - 28 Spline
1979-04 Mustang SVE Aluminum Driveshaft - 28 Spline
1979-04 Mustang SVE Aluminum Driveshaft - 28 Spline
1979-04 Mustang SVE Aluminum Driveshaft - 28 Spline
1979-04 Mustang SVE Aluminum Driveshaft - 28 Spline
1979-04 Mustang SVE Aluminum Driveshaft - 28 Spline
1979-04 Mustang SVE Aluminum Driveshaft - 28 Spline
1979-04 Mustang SVE Aluminum Driveshaft - 28 Spline
1979-04 Mustang SVE Aluminum Driveshaft - 28 Spline
1979-04 Mustang SVE Aluminum Driveshaft - 28 Spline
1979-04 Mustang SVE Aluminum Driveshaft - 28 Spline
1979-04 Mustang SVE Aluminum Driveshaft - 28 Spline
1979-04 Mustang SVE Aluminum Driveshaft - 28 Spline
1979-04 Mustang SVE Aluminum Driveshaft - 28 Spline
1979-04 Mustang SVE Aluminum Driveshaft - 28 Spline
1979-04 Mustang SVE Aluminum Driveshaft - 28 Spline
1979-04 Mustang SVE Aluminum Driveshaft - 28 Spline
1979-04 Mustang SVE Aluminum Driveshaft - 28 Spline
1979-2004 Fox Body, SN95, & New Edge Mustang: SVE Aluminum Driveshafts - Review & Install

Reduce rotational mass and improve acceleration on your 1979-2004 Mustang with this lightweight 28-spline SVE aluminum driveshaft!

Item #SVE-4602G

Everyday Low Price: $399.99

In Stock Ships tomorrow!
 This item is returnable. Details

Free Shipping over $99

 Add to Cart

× close

Made in the USA

 Benefits

  • Fully-Assembled, Ready For Install
  • High-Quality To Withstand Everyday Driving
  • Reduces Rotational Weight
  • Improves Acceleration

 Features

  • 3.5" 6061-T6 Aluminum Tubing
  • 100% American Made Components
  • 28 Spline Yoke w/ 1330 U-Joints
  • High-Speed Balanced

 What's in the Box

  • (1) SVE Aluminum Driveshaft

SVE Aluminum Driveshaft - 28 Spline
Achieve quicker acceleration, reduced weight, and less rotational mass with SVE's 1979-2004 Mustang 28 spline aluminum driveshaft! Factory driveshafts are constructed from heavier steel, which adds additional lag to your engine. Swapping to an aluminum driveshaft reduces that rotational mass, which improves acceleration and also reduces potential drivetrain vibrations. These SVE aluminum driveshafts Weigh in at just a little over 14 lbs. when compared to most factory driveshafts weighing in over 18 lbs. This is a significant reduction of rotational mass. The addition of this driveshaft will result in a more efficient drivetrain which gets your Mustang moving. Pick up this aluminum 28 spline driveshaft from LMR to finish out your driveline upgrades!

High Performance and High-Quality
This SVE driveshaft is engineered and manufactured with precision and high-quality components. Assembled with Alcoa 6061-T6 3.5" aluminum tubing, 1330 series high-performance universal joints, and American-made flanges, this driveshaft will be sure to impress. With a .114" wall thickness, this driveshaft is rated up to 5,000 pound-ft. in torsional yield and 13,900 RPM for critical speed.

**See Vehicle Fitment For All Applications**


SVE Products Limited Warranty - Click Here

  • Ford Mustang - 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
Fitment Notice
  • The 1979-2004 Mustang factory driveshaft bolts are installed using a thread locker chemical and are NOT torque to yield. If reusing the factory bolts, clean the old thread locker material from the threads, and apply new blue thread locker before reinstalling the bolts or use new driveshaft bolts and apply blue thread locker to threads and torque to the factory specifications. New bolts can be found here: HDW-4602.
  • 1979-1995 Mustang 5.0/5.8 with Manual Transmission (SROD/T5)
  • 1979-1995 Mustang 5.0/5.8 with Manual Transmission (Tremec 3550 - Must use driveshaft spacer on 94-95)
  • 1983-1995 Mustang 5.0/5.8 with Automatic Transmission (C4/AOD)
  • 1996-2004 Mustang 4.6 with Automatic Transmission (4R70W/75W) (Must Re-use Factory Transmission Yoke from Stock Driveshaft or Dana/Spicer 2-3-14061X)
  • 1994-2004 Mustang 3.8/3.9 V6 with Manual Transmission (T5)
  • 1996-2004 Mustang 3.8/3.9 V6 with Automatic Transmission (Must Re-use Factory Transmission Yoke from Stock Driveshaft or Dana/Spicer 2-3-14061X)
  • 1984-1986 Mustang SVO
  • Will NOT fit 4-cylinder Automatic transmissions
Additional Installation Note
  • Clearance between the mufflers/exhaust and driveshaft needs to be verified regardless of ride height, and it needs to be checked with the suspension compressed (car at ride height).
  • 1993-2004 Mustangs will sometimes have interference issues between the driveshaft and the front parking brake cable bracket that is spot-welded to the underside of the transmission tunnel. Sometimes, the spot welds break, and the bracket will make contact with the driveshaft. Lowered ride height will make this issue worse. The bracket can be trimmed slightly for more clearance. If the spot welds have broken, they MUST be repaired to rectify the situation.

Product Note
  • Measures 45.5" long, center of u-joint to center of u-joint.

1979-2004 Fox Body, SN95, & New Edge Mustang: SVE Aluminum Driveshafts - Review & Install

Check out our YouTube channel for even more tech tips, installation videos, how-tos, and more. The best place to go for anything Mustang related!


California Residents:
Prop 65 Warning SignWARNING: Cancer and Reproductive Harm- www.P65Warnings.ca.gov

About This Brand


SVE Products ®
Special Vehicle Equipment is a brand focused on providing superior performance and restoration parts for 1979-present Mustang and Ford Lightning trucks. From kits to swap solutions, SVE fuels the enthusiast lifestyle with problem-solving solutions that provide performance with a purpose. Comprised of the highest quality materials, all SVE products display the thorough research and meticulous attention to detail that went into the development of that part. Rest assured that when you purchase an SVE part, you will know you are purchasing a quality solution that will save you time and money.

Add to Cart