Comp Cams Xtreme Energy Camshafts
COMP Cams Xtreme Energy camshafts are built to take advantage of the latest cam technology, to provide maximum performance. Whether your use is off-roading, towing, or street performance, there is an Xtreme Energy cam available for you. By using an aggressive lobe profile, these cams provide better throttle response and more top-end horsepower than equivalent cams from other manufacturers, while delivering increased engine vacuum. Hot street performance. 3.73-4.10 gears recommended. 2000+ stall. Intake & exhaust upgrades recommended. Custom tune required. Noticeable idle.
Requires aftermarket pistons or deeper flycut on factory pistons. Do not run with unmodified factory pistons as engine damage will occur.
-These camshafts require custom computer tuning to maintain drivability and for best power.
-These camshafts require new valve springs! You can use Comp CCA-2611316 valve springs and CCA-79216 retainers, or the complete Trick Flow Upgrade kit TFS-2500500.
Your factory sprocket bolts will not fit these cams. You will need new ARP camshaft bolts for proper installation.
Comp Cams - The Absolute Leader In Valve Train Performance
COMP Cams - The Absolute Leader In Valve Train Performance
COMP Cams manufactures truly superior hydraulic and solid flat tappet, hydraulic and mechanical roller, and overhead camshafts for Latemodel Mustangs and Lightnings. Comp Cams are designed and manufactured using cutting-edge technology and the finest engineering in the industry.
Whether your engine is naturally aspirated, run nitrous, a supercharger or a turbo, Comp Cams make more horsepower than any other. Looking for that ultimate hard-hitting Mustang idle? Check out the aggressive new ThumprCams.
Match Comp Cams camshafts up with their competition-grade lifters, valve springs, timing sets, and other supporting components, and you’ll experience the ultimate in race-winning reliability!