Benefits
- Improved Acceleration
- Complete Kit Eliminates Guesswork
- Great Upgrade Over Stock Gears
- OEM Quality
Features
- 3.73 Ratio Ring And Pinion Gears
- GT500 Pinion Bearings
- Royal Purple Gear Oil
- Friction Modifier
What's in the Box
- (1) Ford Performance Parts 3.73:1 gearset
- (1) Outer 2012 GT500 Style Pinion Bearing & Race
- (1) Inner 2012 GT500 Style Pinion Bearing & Race
- (1) Carrier Shim Set (1) Pinion Shim Set
- (2) Carrier Bearings with Races
- (1) Pinion Seal (10) Ring Gear Bolts
- (2) Crush Sleeve
- (2) Pinion Nut
- (1) Tube Gear Marking Compound
- (1) Cover Gasket
- (1) Bottle of Ford Racing Friction Modifier
- (2) Bottles of Royal Purple 75W140 gear oil
Ford Performance 3.73 Gear KitUpgrade the gears in your 1994-2004 Mustang 8.8" with a Ford Performance 3.73 gear kit to maximize performance. Your factory gears are built to maximize fuel mileage, which leaves much to be desired in the performance department. A gear change can provide a night and day difference when it comes to your Mustang's performance. While these gears do not increase horsepower, they will definitely allow your SN95 or New Edge to get the most out of your low-end torque! Specifically designed for the 8.8 rear end, this kit includes a Ford Performance 3.73 ring and pinion gear set that is made in the USA as well as the additional parts needed for proper installation. Also included are an installation kit, two bottles of Royal Purple 75W140 gear oil, and one bottle of friction modifier. We designed this kit with everything you will need to make the installation of the ring and pinion gear set as painless as possible.
Ring & Pinion Super Install KitsYukon's super install kit can help you get the job done quickly and easily with everything you need to install your new gears. There are close tolerances that have to be met to ensure proper gear life. This rear gear "super" installation kit from Yukon comes with all the necessary shims and marking compound to ensure you have a proper wear pattern on the gears as well as new bearings and races to go along with your new gear set. Coming with a complete specific kit for the Ford 8.8" rear axle, you are sure to have everything you need.
Superior FluidsRoyal Purple Max-Gear gear oil is an ultra-tough automotive gear oil. It is designed to maximize power and provide unsurpassed protection to heavily loaded gears. It makes gears run smoother, quieter, cooler, and longer without overhauls. Max-Gear outperforms other gear oils because it combines the highest quality synthetic oils with Royal Purple’s proprietary Synslide additive technology. Ford Racing friction modifier is a specially formulated additive to provide smooth operation of clutch-type, limited-slip differentials. One bottle of friction modifier is required when changing the gear oil in the rear ends equipped with Ford traction-lock units.
Speedometer Correction
- After installation of rear gears, you will need to correct the speedometer. There are different methods to do this depending on year model.
1979-1995 Speedometer Correction - Click Here
1996-Present Speedometer Correction - Click Here
Ford Performance Racing Parts "Packs" and Component Parts Limited Warranty - Click Here
Ford Performance Racing Parts - NO WARRANTY - Click Here
Ford Performance Racing Parts Crate Engine Limited Warranty - Click Here