Mustang 5 Lug Conversion Kit
This 1993 Cobra 5 lug conversion kit is a great way to upgrade the performance and looks of your Fox Body. Converting your 4 lug Cobra to a 5 lug setup has never been easier with this all in one kit from 5.0 Resto. This kit features new front rotors, rear axles, rear rotors, wheel bearings, wheels studs, grease seals, friction modifier, and gear oil. Not only do you get to run better wheels and better brakes with this kit, you can also use it to replace worn out brake rotors and drums. 5.0 Resto's 5 lug conversion kit restores and upgrades your Fox Body Mustang for better looks and performance.
- 2 Premium Centric brand five lug 11" front rotors.
- 2 5 Lug Rear Rotors for 93 Cobra.
- 2 Rear Caliper Brackets w/ hardware.
- 2 Name brand 28 spline five lug rear axles*.
- 2 inner and outer front wheel bearings.
- 10 standard length rear wheel studs.
- 2 front rotor grease seals.
- 1 bottle of Ford Racing friction modifier.
- 2 bottles of Royal Purple 75W90 gear oil.
*These name brand Mustang axles are stock fox length 28 spline, with a 5" x 4.5" bolt pattern. The included caliper brackets will provide the correct spacing needed for the 93 Cobra. They are made from high quality steel & hardened to increase torque capacity 25% over a stock axle!
Here is a list of wheels that will work with this kit without modification:
-99-04 SVE 10th Anniversary
-95 Cobra R Wheel
-94-95 17" "Tri-Bar" GT Wheel
-94-98 16" Waffle Star Pony Wheel
-94-97 Cobra Wheel
-94-04 15" V6 Wheel
-94-04 16" V6 Wheel
-SVE Drag Wheels
-Billet Specialties Street Lites
Will NOT fit SVE 10th Anniversary wheels with a 24mm offset.
-Fits ALL Mustangs equipped with an 8.8 rear end.
-Some Mustangs may require front fender/fenderwell modifications depending on tire size and ride height, especially 1987-90 because of the smaller wheel opening. 1991-93 Mustang has a larger fender opening but still may require modification. Modifications typically consist of trimming the fender & lower front spat for tire clearance, &/or trimming the wheel well liner.
The installation of this kit will narrow the 93 Cobra track width by .75". This makes the track width equal to that of a normal 5.0L fox.
- Fits 1993 Mustang Cobra
Axle Fitment Disclaimer:
The axles included in this purchase will not fit 1984-1986 SVO or 1987-1993 Saleen Mustangs.
5.0 Resto - Dedicated To The Preservation Of The Fox Body Mustang
5.0 Resto® specializes in restoration and specialty parts for 1979-1993 Ford Mustangs. Using years of experience in the late model Mustang restoration and aftermarket industry, 5.0 Resto® is your source for anything Fox Mustang. While designing, and manufacturing several items such as 5-Lug Conversion Kits, weather stripping components and interior restoration items, 5.0 Resto® also uses many other name brand suppliers to provide problem solving products directly to the Fox Body Mustang community. As with any part branded as 5.0 Resto®, they stand behind all of these products to the fullest extent and have tested these products to ensure they live up to the quality and performance you have come to expect!