Finish off your coil over conversion with these non-offset front control arms from Maximum Motorsports! Non-offset control arms maintain the stock relationship of the ball joint to the pivot bushings. By removing the spring perch along with the tubular design; you will be dropping a combined 13.5 pounds from the front of your 1994-2004 Mustang!
Maximum Motorsports has used a unique and true A-arm design that maximizes rigidity and equally absorbs all impact into the K-member. The arms are gusseted in strategic locations to ensure the control arm will bend in an accident, absorbing energy, before a weld will ever break. The smaller bushing design helps create a quicker steering response. All Maximum Motorsports control arms feature low friction ball joints greater ride quality and handling.
Requires coil over conversion.
Keeps stock wheelbase with factory K-member. Will move wheelbase forward 3/4" with the Maximum Motorsports K-member.
-Fits 1994-04 Mustang
The suspension bushings included with this part can only be lubricated with PTFE grease, also referred to as "Marine Grease". PTFE grease is a very sticky, opaque grease that is water proof and will not degrade the bushing material. If lubed properly at installation, these bushings will not need to be lubricated again. Use of any other grease on these bushings will cause the bushing to fail and any bushing warranty to be voided.
Maximum Motorsports is well respected as a leading developer of suspension systems and performance parts for your Mustang or Lightning. Established in 1992, the team at MM has spent countless hours researching and developing the highest quality suspension components for 1979-Present Mustangs and 1993-Present SVT Lightnings. Maximum Motorsports has strived to produce lightweight, direct replacement suspension parts to get your vehicle handling, launching, and cornering better than ever. Shop LatemodelRestoration.com for performance panhard bars, k-members, subframe connectors, steering racks, caster/camber plates. chassis braces, control arms, roll bars, wheel spacers, and other tubular suspension parts.