Lightweight Racing Wheel
Add some serious race looks to your Fox Body with these Weld Racing Draglite wheels. These wheels are a direct fit application for your 1979-93 Ford Mustang. Adding a set of lightweight drag rims to your Stang for great weight reduction to get better performance on and off the track. These 15x10 Weld Draglite wheels feature a polished finish for great looks and classic styling.
Wheel Clearance Notes
- 1979-93 Mustangs All: Quad shocks may need to be reversed or removed for proper fitment. Please check for clearance issues before driving the car.
- This wheel is designed to ONLY be used on the rear of your 1979-1993 Mustang!
Why Drag Wheels?
Switching to lighter drag wheels reduces weight and allows for track specific, performance tires to be mounted on your Mustang. The rear wheels are 10" to mount wider tires, drag radials or slicks for more traction. This allows you to launch harder and improve your ET's at the track.
- Push-thru center cap & valve stem included
- Maximum load rating for street applications is 1200 lbs per wheel (2400 lbs per axle) with a 28" tire.
- Mag style lug nut required with a 1.310" to 1.375 shank length.
- Made in USA
Fits 1979-93 Mustangs
This wheel does not have a protective clear coat finish. To prevent pitting or spotting you must polish and seal regularly.
Drag Wheel/Lug Nut Disclaimer
When using longer than factory studs, an open end lug nut is required.
Weld Racing, a market leader in forged wheel technology for your Mustang, was started in 1967. The vision was to build stronger, lighter and truer wheels for both on and off the race track. The technology that dominates Drag Racing and Oval Track Racing is shared with the Car, Truck, and Motorcycle wheel lines. In addition, Weld Racing wheels are newly available for Sand Sports and Off-Road racing.
The Weld Racing organization is a group committed to producing cutting-edge forged alloy wheels of the highest quality to enhance the performance and appearance of race cars, off-road trucks, sand rails, luxury pickups, SUV's, premium motor cars, customs, hot rods, and motorcycles. Shop LatemodelRestoration.com for high quality Weld Racing wheels
Upload your own picture of the Mustang Weld Racing Draglite Wheel - 15x10" Polished (79-93)
Please make sure to hold your device horizontally (like a camera) rather than vertical (like a phone).
By uploading an image, you agree to give LMR.com ® permission to use it in future advertisements and promotions.
The wheel size is the diameter of the wheel, in inches, not counting the tire.
Modern tires in North America have several other measurements associated with their size.
A tire designated as a "225/70R14" denotes a tire with the following dimensions: width of tread: 225 mm; ratio of tire height to width: 70 percent; rim diameter: 14".
Therefore a 185/70R14 has the same rim diameter and aspect ratio, but a smaller overall diameter and narrower tread face than the 225/70R14.
The easiest way to measure backspace is to lay the wheel face down onto the ground so the backside of the wheel is facing up.
Take a straight edge and lay it diagonally across the inboard flange of the wheel. Take a tape measure and measure the distance from where the straight edge contacts the inboard flange to the hub mounting pad of the wheel. This measurement is the backspace.
The photo below shows three wheels with 2", 3", & 4" backspace.
Wheel Bolt Circle
The bolt pattern or bolt circle is the diameter of an imaginary circle formed by the centers of the wheel lugs. Bolt patterns can be 4, 5, 6, or 8 lug holes. A bolt circle of 4x100 would indicate a 4 lug pattern on a circle with a diameter of 100mm.
The diagram indicates the proper measuring methods. 6 lug wheels are measured like the 4 lug wheels.
The offset, measured in millimeters, can be negative or positive, and is the distance from the hub-mounting surface to the rim's true centerline. A positive offset means the hub-mounting surface is closer to the outside edge of the wheel; a negative offset means the hub-mounting surface is closer to the inside edge of the wheel. Offset affects the scrub radius of the steering and it is advisable to stay within the limits allowed by the vehicle manufacturer. If tires are fitted which are significantly wider than those specified by the manufacturer, a compromise may have to be adopted whereby a wheel with less offset is used to prevent the tire rubbing on the suspension.
Wheel Lug Pattern
Wheel lugs or bolt pattern is merely the number of bolts or lugs on the wheel. As the bolts will be evenly spaced, the number determines the bolt pattern. For example, most U.S. passenger cars have 5 bolts while compact models sometimes have only 4 and pick-up trucks can have as many as 6 or 8.