Diameter 17"Width 8"Lugs 5Offset +19 mm.Backspacing 5.25 in.Bolt Circle 0 mm.
5 Lug Pony Wheel
Add these 5 lug Pony wheels to your 1979-1993 Fox Body Mustang to complete your 5 lug conversion! The Pony wheel is one of the most popular wheels for 79-93 Fox Body Mustang. Now, you can simply bolt up this Pony wheel to your 5 lug Mustang and retain that factory look! The Silver Pony wheel gives your Fox Body a new look to compliment your car. It adds that custom touch or brings life to your restoration project.
High Quality Construction
Made of cast aluminum, this 1 piece wheel is painted Silver to add great styling to any color 79-93 hatch, convertible, or coupe Mustang. Weighing in at 23 lbs, it is lighter than most aftermarket wheels to keep your Fox lightweight. This wheel is finished off with matching center caps.
Upload your own picture of the Mustang 5 Lug Pony Wheel & Ford Licensed Center Cap - 17x8 Silver (79-93)
Please make sure to hold your device horizontally (like a camera) rather than vertical (like a phone).
By uploading an image, you agree to give LMR.com ® permission to use it in future advertisements and promotions.
The wheel size is the diameter of the wheel, in inches, not counting the tire.
Modern tires in North America have several other measurements associated with their size.
A tire designated as a "225/70R14" denotes a tire with the following dimensions: width of tread: 225 mm; ratio of tire height to width: 70 percent; rim diameter: 14".
Therefore a 185/70R14 has the same rim diameter and aspect ratio, but a smaller overall diameter and narrower tread face than the 225/70R14.
The easiest way to measure backspace is to lay the wheel face down onto the ground so the backside of the wheel is facing up.
Take a straight edge and lay it diagonally across the inboard flange of the wheel. Take a tape measure and measure the distance from where the straight edge contacts the inboard flange to the hub mounting pad of the wheel. This measurement is the backspace.
The photo below shows three wheels with 2", 3", & 4" backspace.
Wheel Bolt Circle
The bolt pattern or bolt circle is the diameter of an imaginary circle formed by the centers of the wheel lugs. Bolt patterns can be 4, 5, 6, or 8 lug holes. A bolt circle of 4x100 would indicate a 4 lug pattern on a circle with a diameter of 100mm.
The diagram indicates the proper measuring methods. 6 lug wheels are measured like the 4 lug wheels.
The offset, measured in millimeters, can be negative or positive, and is the distance from the hub-mounting surface to the rim's true centerline. A positive offset means the hub-mounting surface is closer to the outside edge of the wheel; a negative offset means the hub-mounting surface is closer to the inside edge of the wheel. Offset affects the scrub radius of the steering and it is advisable to stay within the limits allowed by the vehicle manufacturer. If tires are fitted which are significantly wider than those specified by the manufacturer, a compromise may have to be adopted whereby a wheel with less offset is used to prevent the tire rubbing on the suspension.
Wheel Lug Pattern
Wheel lugs or bolt pattern is merely the number of bolts or lugs on the wheel. As the bolts will be evenly spaced, the number determines the bolt pattern. For example, most U.S. passenger cars have 5 bolts while compact models sometimes have only 4 and pick-up trucks can have as many as 6 or 8.
Ihave had a few Mustangs starting with the red one it is a factory took it through some restoration made it sterling grey with black stripes very fun cars to work with now have a 1991 5.0 factory 5 sp...