Eliminate all guesswork when repairing oil or coolant leaks on your 1996-2004 SN95 or New Edge Mustang with this premium oil cooler rebuild kit from LMR! From the factory, the 4.6 4V engine was equipped with an engine oil cooler that was attached to the oil filter adapter. This cooler utilized engine coolant to cool down the temperature of the engine oil. After years of service and abuse, the o-rings that seal this unit together will wear out causing oil to seep past the o-rings resulting in oil and coolant mixing together. To prevent the cross-contamination of these two fluids and the catastrophic issues that may occur from this, LMR has thoroughly researched and developed a problem-solving rebuild kit for your 4.6 4V modular engine!
To properly bolster the phenomenal attention to detail, LMR utilized only the highest of quality materials when assembling this oil cooler rebuild kit for you. Featuring a durable oil filter adapter gasket constructed from molded rubber and reinforced with a grooved silicone bead, rest assured this gasket is built to last! Eliminating oil and coolant leaks has never been easier as LMR provides the correct chemical resistant o-rings that utilize the factory dimensions, tolerances, and durometer to restore the proper flow of fluids in your 4.6 4V equipped Mustang. To seal the deal, LMR has taken the extra time and created an easy to follow reference guide to ensure your oil cooler is correctly reassembled for the ultimate peace of mind!
O-rings must be lubricated before installation.
Due to the tight tolerances of the oil cooler bolt's o-ring, LMR provides two of these o-rings in case it is damaged during the installation process.