Benefits
- Compact Design
- Eliminates Mechanical Fan
- Enhances The Cooling System
- Advanced Adjustable Controls
- Increased Cooling Fan Output
Features
- Stainless Overflow Tank
- Contour Fan Mounting Kit
- Contour Dual Electric Fans
- Approximately 3,500 CFM Output
- Dakota Digital Bluetooth Fan Controller
What's in the Box
- (1) Contour Electric Fan
- (1) Contour Mounting Kit
- (1) SVE Stainless Overflow Tank
- (1) Dakota Digital Fan Controller Kit
- (1) SVE Y-Block
SVE Contour Fan Conversion KitFreeing up horsepower to your engine while keeping your engine cool in extreme conditions is made easy with this SVE 1979-1993 Mustang contour fan conversion kit! From the factory, your Mustang has a single fan blade attached to a fan clutch that is bolted to the water pump pulley. This causes parasitic loss as your engine has to spin the assembly, and as you modify your engine, this single fan blade has a hard time keeping up with the demands of your newfound power. SVE's contour fan conversion kit includes everything you need to convert to an electric fan setup!
Contour Fan & Mounting KitThis kit replaces your factory mechanical fan with the highly sought-after Contour electric fan. The electric Contour fan combines approximately 3,500 CFM fan output into a compact, factory-style assembly. This fan assembly measures 24-1/4" wide, 16-3/4" tall, and 3.5" deep to provide plenty of core coverage while also clearing the front accessory drive! 5.0 Resto's Contour fan mounting kit is included to mount the fan assembly to your SVE radiator. A pair of 16 gauge aluminum mounting brackets properly locate the fan to your radiator. A new overflow tank and mounting bracket are included to finalize the plumbing to the new radiator. All necessary hardware is included to mount everything up.
Adjustable Fan ControllerTo finalize this kit and tie everything together, SVE includes a Dakota Digital electric fan controller kit. This kit uses Bluetooth control to allow you to fully program everything from the driver's seat of your Fox. You'll have the capability to leave the electric fan operating after the engine has been shut down, for an adjustable period of time. A 1/8" temperature sensor with a range from 0-300 degrees Fahrenheit allows you to adjust when the fans come on. An SVE Y-block provides you the ability to mount this sensor, as well as the factory sensor, to your factory heater tube so you don't have to remove the thermostat housing. You'll save a tremendous amount of time and coolant by mounting it this way! Two 70 amp relays are included to eliminate the need to run large power wires to every switch on the dash.
Application- Fits 1979-1993 Mustang 5.0
SVE Products Limited Warranty - Click Here
WARNING: Cancer and Reproductive Harm- www.P65Warnings.ca.gov
