2015-2023 Mustang SVE MHP1 Wheel Kit - 19x10 - Satin Bronze by SVE Wheels ®

2015-2023 Mustang SVE MHP1 Wheel Kit - 19x10 - Satin Bronze
Transform the look of your S550 with a detailed track-focused appearance and sharp lines using the satin bronze 19x10 SVE MHP1 wheel kit! The SVE MHP1 wheel kit improves the appearance and feel of your Mustang by combining performance-oriented design with artistic styling. SVE's MHP1 wheel uses flow-formed aluminum which reduces rotating mass compared to cast wheels! Featuring an intricate overlapping split Y-spoke design; the MHP1 wheel highlights the body lines of the S550 Mustang. Each Y-shaped spoke has a smaller nested spoke within to provide definition, and amazing depth while giving a three-dimensional effect to the wheels. The wheel spokes slant into the recessed center section that contains the SVE center cap displayed front and center.  A set of black lug nuts of the correct thread size and pitch are included for an easy installation. Finished in sleek, satin bronze paint; your SVE MHP1 wheel kit will look right at home on any color 2015-2023 Mustang!

Flow Formed Construction
SVE's MHP1 wheel is constructed using the flow-formed process. After casting, the wheel is flow-formed with hydraulic rollers that apply intense pressure to the barrel to increase tensile strength. Flow forming provides greater shock resistance, load capacity, and results in a very strong, lightweight wheel versus heavier, cast-aluminum wheels. Reducing weight at the wheels lets more horsepower find its way to the pavement, and improves handling. The MHP1 wheel is backed by a limited lifetime structural warranty for the ultimate peace of mind!

Superior Fitment
SVE carefully measured every millimeter of this wheel to ensure the best fit and finish on the market. Designed to not only flow with the body lines of your Mustang, the MHP1 wheel is designed to clear large brake packages. From the backspacing and offset to the width and diameter, the MHP1 wheel provides your Mustang with superior styling and phenomenal performance!

SVE MHP1 Fitment Vs Ford Performance M1007KMACH1H
With the release of the SVE MHP1 and Ford Performance M1007KMACH1H, there have been many questions regarding the fitment of each wheel. The M-1007K-MACH1H kit is intended for use only on vehicles originally equipped with the Mach 1 Handling Package with fender flares. Use on other vehicles may result in tire-to-body/chassis clearance issues. Our SVE MHP1 wheel was designed for non-Mach 1 Handling Package Mustangs from 2005-2023 with the correct offset to ensure the wheel has the proper fitment and clearance. While the SVE MHP1 wheels will physically fit on a Mach 1 with Handling Package, they are 0.5” narrower in the front and will not protrude past the fender as seen on the original Handling Package wheels.

This photo shows a comparison of running the M1007KMACH1H vs an SVE MHP1 wheel on a 2021 GT/CS.

5.0 Resto and SVE Wheel Limited Warranty - Click Here