2005-2022 Mustang SVE MHP1 - 19x10 - Gloss Graphite
Transform the look of your S197 or S550 with a detailed track-focused appearance and sharp lines using the gloss graphite 19x10 SVE MHP1 wheel! The SVE MHP1 wheel improves the appearance and feel of your Mustang by combining performance-oriented design with artistic styling. SVE's MHP1 wheel uses flow-formed aluminum which reduces rotating mass compared to cast wheels! Featuring an intricate overlapping split Y-spoke design; the MHP1 wheel highlights the body lines of both S197 and S550 Mustangs. Each Y-shaped spoke has a smaller nested spoke within to provide definition, amazing depth, and give a three-dimensional effect to the wheels. The wheel spokes slant into the recessed center section that contains the SVE center cap displayed front and center. Finished in sleek, gloss graphite paint; your SVE MHP1 wheel will look right at home on any color Mustang!
Flow Formed Construction
SVE's MHP1 wheel is constructed using the flow-formed process. After casting, the wheel is flow-formed with hydraulic rollers that apply intense pressure to the barrel to increase tensile strength. Flow forming provides greater shock resistance, load capacity, and results in a very strong, lightweight wheel versus heavier, cast-aluminum wheels. Reducing weight at the wheels lets more horsepower find its way to the pavement, and improves handling. The MHP1 wheel is backed by a limited lifetime structural warranty for the ultimate peace of mind!
SVE carefully measured every millimeter of this wheel to ensure the best fit and finish on the market. Designed to not only flow with the body lines of your Mustang, the MHP1 wheel is designed to clear large brake packages. From the backspacing and offset to the width and diameter, the MHP1 wheel provides your Mustang with superior styling and phenomenal performance!
SVE MHP1 Fitment Vs Ford Performance M1007KMACH1H
With the release of the SVE MHP1 and Ford Performance M1007KMACH1H, there have been many questions regarding the fitment of each wheel. The M-1007K-MACH1H kit is intended for use only on vehicles originally equipped with the Mach 1 Handling Package with fender flares. Use on other vehicles may result in tire-to-body/chassis clearance issues. Our SVE MHP1 wheel was designed for non-Mach 1 Handling Package Mustangs from 2005-2022 with the correct offset to ensure the wheel has the proper fitment and clearance. While the SVE MHP1 wheels will physically fit on a Mach 1 with Handling Package, they are 0.5” narrower in the front and will not protrude past the fender as seen on the original Handling Package wheels.
This photo shows a comparison of running the M1007KMACH1H vs an SVE MHP1 wheel on a 2021 GT/CS.
Check out our YouTube channel for even more tech tips, installation videos, how-tos, and more. The best place to go for anything Mustang related!
Need to reset your S197 Mustang's TPMS sensors? Follow along as we walk you through the quick and easy steps to reset your 2005-14 Mustang TPMS sensors. more
Posted on 4/5/2017