Mustang SVE Drag Comp Wheel Kit
- Track-Ready Function & Styling
- Reduced Weight for Lower E.T.'s
- Superior Fitment & Performance
- Lifetime Structural Warranty
- Split Multi-Spoke Design
- Gloss Black Face & Machined Windows
- Mild Polished Lip w/ Clear Coat Finish
- Radial Brushed Center Cap
What's in the Box
- (2) 17x4.5 Drag Comp Wheels
- (2) 15x10 Drag Comp Wheels
Stimulate the performance and styling of your 1994-2004 Mustang at the drag strip with SVE's Drag Comp wheel kit! Engineered to cater to the current and future demands of what Mustang enthusiasts are searching for in a Mustang drag wheel, the SVE Drag Comp combines track-ready function with an aesthetic appeal that turns heads in the pits. Featuring a crisp, multi-spoke design that glides around a recessed center section, this wheel is sure to highlight the body lines of your Mustang! A gloss black finish is applied to the face of the wheel, while the windows are machined to provide clarity of the spokes. The outer lip is mildly polished and topped off with a clear coat finish for easy cleaning. SVE's Drag Comp wheel kit is sure to make your Mustang look as good as it performs!
Superior Fitment & Quality
SVE carefully measured every millimeter of this wheel kit to ensure the best fit and finish possible. These Mustang drag wheels are designed to be lightweight for faster elapsed times, while also precision fit to clear most brake packages. From the backspacing and offset, to the width and diameter, the SVE Drag Comp wheel provides your Mustang with superior styling and exceptional performance! Constructed using 1-piece, cast aluminum; this wheel is durable and backed by a lifetime structural warranty for the ultimate peace of mind.
SVE Drag Comp wheels are NOT
intended for street use or daily driving. Late Model Restoration is NOT
responsible for damage to brake or suspension components caused by customer modification.
Lug Nut Note
- Size: 17x4.5
- Backspace: 1.77"
- Offset: -25mm
- Weight: 18.92lbs
- Lug Pattern: 5x114.3
- Size: 15x10
- Backspace: 6.29"
- Offset: +20mm
- Weight: 19.52lbs
- Lug Pattern: 5x114.3
Designed for use with spline drive lug nuts.
Fits 1994-2004 Mustang GT/V6 with Stock Rear Brakes
SN95 Or Fox Spindle Wheels - Clearance Notes
- 1979-86 Mustang (All) - Requires a front-wheel spacer OR upgrading to 1994-2004 Mustang spindles or 1987-1993 5.0 struts, spindles & brakes
- 1987-93 Mustang (2.3L) - Requires a front-wheel spacer OR upgrading to 1994-2004 Mustang spindles or 1987-1993 5.0 struts, spindles & brakes.
- 1979-93 Mustang w/ Fox Spindle(All) - May require a front 8MM spacer to keep the grease cap from pushing out the center cap.
- 1979-93 Mustang (All) - Steering rack limiters May be needed to eliminate rubbing issues when turning the front wheel.
- 1979-90 Mustang (All) - Due to smaller front wheel openings, Installation of wheels or tires that are wider than the factory may require additional clearance on front fenders.
- 1979-04 Mustang (All) - Rear quad shock equipped Mustangs may need to have the quad shocks reversed or removed for proper fitment. Please check for clearance before driving.
- 1979-04 Mustang (All) - Installation of wheels that are wider than the factory wheels on the rear of your Mustang may require fender rolling and exhaust modification for proper fitment.
- 1994-04 Mustang Cobra/IRS Equipped (All) - May require Low Profile IRS Subframe Bolts for proper clearance.
- 1994-04 Mustang Cobra/IRS Equipped (All) - An 1/8" Wheel Spacer may be required to ensure the rear center caps are properly secured.
5.0 Resto and SVE Wheel Limited Warranty - Click Here