Bring Your Pony Back To Life
Give your 1979-1993 Fox Body Mustang a classic look by adding this silver 5 lug 17x8/9 Pony wheel & Sumitomo tire kit by 5.0 Resto! After the debut of this original design on 1991 Mustang GT and LX trim levels, this wheel design became a popular upgrade for all year range Fox Body Mustangs. Featuring the factory 5x4.5 lug pattern and a cast aluminum construction, these one-piece wheels are painted silver to add great styling to any color hatch, convertible, or coupe Mustang. Weighing in at 25 lbs. each, this wheel is lighter than most factory wheels to keep your Fox lightweight. Included with this Pony wheel & tire kit, is four Ford Licensed center caps; keeping the Mustang authenticity intact. This will ensure your Fox Body retains a factory-new look to compliment your custom or restoration project.
Wheel Diameter - 17
Wheel Width - 8
Lugs - 5
Offset - +19mm
Backspacing - 5.25
Wheel Diameter - 17
Wheel Width - 9
Lugs - 5
Offset - +24mm
Backspacing - 5.94
Sumitomo HTR Z5
This Sumitomo HTR Z5 tire offers an aggressive, directional tread pattern to offer superior traction in dry or wet road conditions. The HTR Z5 molds a high-performance tread compound featuring ultra micro carbon technology and silica-based rubber into a directional pattern that features wide, arched tread blocks to enhance dry road traction and handling. Like all summer tires, the HTR Z5 is not intended to be driven in near-freezing temperatures, through snow or on ice.
From Start To Finish
All of our wheel and tire kit orders are handled professionally and with the highest level of quality to make sure they are ready to bolt on when they arrive on your doorstep! Our facilities utilize high tech digital mounting equipment, trained technicians, and a clean work area. All of our mounting & balancing is done FREE of charge with the purchase of any wheel & tire kit!
- Fits 1979-1993 Ford Mustangs with 5 lug
The Ford Licensed Silver Pony Center Caps are painted to correct OE specs. From the factory, the center cap was not 100% a perfect match to the aluminum pony wheel. The shade being off is factory correct and perfectly normal.
Wheel Clearance Notes
- 1979-93 Mustang (All) (EXCL. 17x8" Wheels) - Steering rack limiters May be needed to eliminate rubbing issues when turning the front wheel.
- 1979-86 Mustang (All) - Requires a front wheel spacer OR upgrading to 1987-1993 5.0 struts, spindles & brakes.
- 1987-93 Mustang (2.3L) - Mustangs require a front wheel spacer OR upgrading to 1987-1993 5.0 struts, spindles & brakes.
- 1979-93 Mustang (All) - May require a front 8MM spacer to keep the grease cap from pushing out the center cap.
- 1979-04 Mustang (All) - Rear quad shocks may need to be reversed or removed for proper fitment. Please check for clearance issues before driving the car.
- 1979-04 Mustang (All) - Installation of this wheel on the rear of your Mustang may require fender rolling, exhaust modification, or a combination of all three for proper fitment.
- 1999-04 Cobra (All) - Will need low profile IRS bolts for proper clearance.
- 1999-04 Cobra (All) - A 3mm spacer is required to ensure the rear center caps are properly secured.
Sumitomo Tire Limited Warranty - Click Here
5.0 Resto Products Limited Warranty - Click Here