2005-2014 Mustang SVE MHP1 Wheel & Nitto Tire Kit - 19x10/11 - Satin Bronze by SVE Wheels

2005-2014 Mustang SVE MHP1 Wheel & Nitto Tire Kit - 19x10/11 - Satin Bronze

Transform the look of your S197 with a detailed track-focused appearance and sharp lines using the satin bronze 19x10/11 SVE MHP1 wheel & Nitto NT555 G2 tire kit! With styling cues taken from the Mach 1 handling pack wheel, the SVE MHP1 wheel kit improves the appearance and feel of your Mustang by combining performance-oriented design with artistic styling. SVE's MHP1 wheel uses flow-formed aluminum which reduces rotating mass compared to cast wheels! Featuring an intricate overlapping split Y-spoke design; the MHP1 wheel highlights the body lines of the S197 Mustang. Each Y-shaped spoke has a smaller nested spoke within to provide definition, and amazing depth while giving a three-dimensional effect to the wheels. The wheel spokes slant into the recessed center section that contains the SVE center cap displayed front and center. Also featured in this kit are 285/35/19 front and 305/35/19 rear Nitto NT555 G2 tires for superior traction and everyday driving! A set of black lug nuts of the correct thread size and pitch are included for an easy installation. Finished in sleek, satin bronze paint; your SVE MHP1 wheel & Nitto tire kit will look right at home on any color 2005-2014 Mustang!

Flow Formed Construction

SVE's MHP1 wheel is constructed using the flow formed process. After casting, the wheel is then flow formed with hydraulic rollers that apply intense pressure to the barrel to increase tensile strength. Flow forming provides greater shock resistance, load capacity, and results in a very strong, lightweight wheel versus heavier, cast-aluminum wheels. Reducing weight at the wheels lets more horsepower find its way to the pavement, and improves handling. The MHP1 wheel is backed by a limited lifetime structural warranty for the ultimate peace of mind!

Superior Fitment

SVE carefully measured every millimeter of this wheel to ensure the best fit and finish on the market. Designed to not only flow with the body lines of your Mustang, the MHP1 wheel is designed to clear large brake packages. From the backspacing and offset to the width and diameter, the MHP1 wheel provides your Mustang with superior styling and phenomenal performance!

Wheel Specs:

Front

• Size: 19x10
• Offset: +35mm
• Backspace:  6.88"
• Weight: 23.4lbs

Rear

• Size: 19x11
• Offset: +50mm
• Backspace:  7.94"
• Weight: 23.5lbs

Nitto NT555 G2 Tires

This kit comes pre-mounted and balanced with Nitto NT555 G2 tires. This summer ultra-high-performance tire is designed with the performance driver in mind. The new Nitto G2 has increased traction, handling, and wet-braking capabilities to help you get off the line quicker and provide your Mustang with stability in the straights and confidence when cornering.

Tire Specs

• Front Tire Size: 285/35R19
• Rear Tire Size: 305/35R19
• Treadwear: 320
• Traction: AA
• Temperature: A

From Start To Finish

All Mustang wheel and tire kit orders are handled professionally and with the highest level of quality to make sure they are ready to bolt on when they arrive on your doorstep! Our facilities utilize high-tech digital mounting equipment, trained technicians, and a clean work area. All mounting and balancing are done FREE of charge with the purchase of any Mustang wheel & tire kit!

Application

• Fits 2005-2014 Ford Mustang

SVE MHP1 Fitment Vs Ford Performance M1007KMACH1H

With the release of the SVE MHP1 and Ford Performance M1007KMACH1H, there have been many questions regarding the fitment of each wheel. The M-1007K-MACH1H kit is intended for use only on vehicles originally equipped with the Mach 1 Handling Package with fender flares. Use on other vehicles may result in tire-to-body/chassis clearance issues. Our SVE MHP1 wheel was designed for non-Mach 1 Handling Package Mustangs from 2005-2022 with the correct offset to ensure the wheel has the proper fitment and clearance. While the SVE MHP1 wheels will physically fit on a Mach 1 with Handling Package, they are 0.5” narrower in the front and will not protrude past the fender as seen on the original Handling Package wheels.

This photo shows a comparison of running the M1007KMACH1H vs an SVE Mach MHP1 wheel on a 2021 GT/CS.

5.0 Resto and SVE Wheel Limited Warranty - Click Here

• WILL clear 4/6 Piston Brembo brakes including 2007-2014 GT500 applications. 
• May Not fit aftermarket brake kits. Please see the manufactures recommended clearance notes for the brake kit you have.