1994-04 Mustang SVE S350 Wheel & Nitto Tire Kit - 18x9/10 - Gloss Black by SVE Wheels ®

SVE Gloss Black S350 Wheel & Tire Kit
Modernize the look of your 1994-2004 Mustang with this SVE S350 wheel and tire kit! The SVE S350 wheel brings a new level of style to the Mustang world. Our SVE S350 wheel has a 10 spoke design, in an 18" diameter! A gloss black finish is featured on this wheel, and is sure to look great on any color Mustang! Your kit arrives pre-mounted and balanced, ready to install!

Flow Formed Construction
SVE's S350 wheel is constructed using the flow-formed process. After casting, the wheel is flow-formed with hydraulic rollers that apply intense pressure to the barrel to increase tensile strength. Flow forming provides greater shock resistance, load capacity and results in a very strong, lightweight wheel versus heavy, cast aluminum wheels. A limited lifetime structural warranty backs SVE's S350 wheel for the ultimate peace of mind!

Superior Fitment
SVE carefully measured every millimeter of this wheel to ensure the best fit and finish on the market. Designed to flow with your Mustang's body lines, the S350 wheel will also clear big brake packages. From the backspacing and offset to the width and diameter, the S350 wheel provides your Mustang with superior styling and exceptional performance! These wheels fit factory GT350 center caps.

Nitto NT555 G2 Tires
This kit comes pre-mounted and balanced with Nitto NT555 G2 tires. This summer ultra-high-performance tire is designed with the performance driver in mind. The new Nitto G2 has increased traction, handling, and wet-braking capabilities to help you get off the line quicker and give your Mustang stability in the straights and confidence when cornering.

Tire Specs

• Speed Rating: W
• Treadwear: 320
• Traction: AA
• Temperature: A

From Start To Finish
All of our wheel and tire kit orders are handled professionally and with the highest quality to ensure they are ready to bolt on when they arrive on your doorstep! Our facilities utilize high tech digital mounting equipment, trained technicians, and a clean work area. All of our mounting and balancing is done FREE of charge with the purchase of any wheel & tire kit!

SN95 Spindle Wheels - Clearance Notes

• 1979-04 Mustang (All)
  • Installation of wheels that are wider than the factory wheels on the rear of your Mustang may require fender rolling and exhaust modification for proper fitment.
  • Rear quad shock equipped Mustangs may need to have the quad shocks reversed or removed for proper fitment. Please check for clearance before driving.
  • The 1996-2004 spindle can still be easily used, but these will have a slightly different position for the outer tie rod end and may cause bumpsteer in some cases. These will also kick the wheel out around 8mm.
• 1979-93 Mustang (All)
  • Must be using 1994-2004 Mustang spindles for correct fitment.
  • Steering rack limiters May be needed to eliminate rubbing issues when turning the front wheel.
• 1979-90 Mustang (All)
  • Due to smaller front wheel openings, installing wheels or tires that are wider than the factory may require additional clearance on front fenders.
• 1994-04 Mustang Cobra/IRS Equipped (All)
  • It may require Low Profile IRS Subframe Bolts for proper clearance.
  • A 1/8" Wheel Spacer may be required to ensure the rear center caps are adequately secured.

• For information on installing these wheels on a 1979-1993 Fox Body Mustang, please review our detailed Fox Body Wheel & Tire Fitment Guide for everything required.

5.0 Resto and SVE Wheel Limited Warranty - Click Here