Benefits
- Provides Saleen SC Styling
- Clears Cobra Brakes
- Pre-Mounted & Balanced
- Lifetime Structural Warranty
Features
- Chrome Finish
- Saleen 5-Spoke Design
- 1-Piece Cast Aluminum Construction
- Mickey Thompson Street Comp Tires
What's in the Box
- (2) 17x9 SC Wheels
- (2) 17x10.5 SC Wheels
- (2) 275/40/17 Mickey Thompson Street Comp Tires
- (2) 315/35/17 Mickey Thompson Street Comp Tires
Mustang SC Wheel & Tire Kit Add Saleen styling to your 1994-2004 Mustang with this SC wheel and tire kit! First seen on the 80's Saleen Mustang, the SC wheel has been a staple in the Mustang community for a very long time. The flat, 5-spoke design perfectly accents the body lines of SN95 and New Edge Mustangs. Sized in 17x9 and 17x10, these wheels improve traction and handling over the skinny factory wheels. Completed in a chrome finish, this wheel is sure to look great on any color Mustang! Your kit arrives pre-mounted and balanced, ready to install!
SVE QualitySVE carefully measured every millimeter of this wheel to ensure the best fit, and finish, for your Mustang. The Saleen SC wheel was designed to not only flow with the body lines of your Mustang, but the wheel will also clear 13" Cobra brakes. From the backspacing and offset, to the Deep Dish 10" width rear wheel and 17" diameter, the Saleen SC wheel provides your Mustang with classic styling and exceptional performance! Constructed using 1-piece, cast aluminum; the Saleen SC wheel is built to last!
Mickey Thompson Street Comp TireImprove traction, and handling, in your Mustang with Mickey Thompson's Street Comp tire! These tires were manufactured specifically for ultra-high-performance applications. Featuring an asymmetric tread design, you get a tire that gives you high-speed cornering ability, amazing handling, and great traction. Compounded for both dry and wet traction, this tire will improve the look and handling of your Mustang!
Tire Specs:- Treadwear - 300
- Traction - AA
- Temperature - A
- Speed Rating - W
From Start To FinishAll of our wheel and tire kit orders are handled professionally and with the highest level of quality to make sure they are ready to bolt on when they arrive on your doorstep! Our facilities utilize high tech digital mounting equipment, trained technicians, and a clean work area. All of our mounting and balancing is done FREE of charge with the purchase of any wheel & tire kit!
SN95 Spindle Wheels - Clearance Notes
- 1979-04 Mustang (All)
- Installation of wheels that are wider than the factory wheels on the rear of your Mustang may require fender rolling and exhaust modification for proper fitment.
- Rear quad shock equipped Mustangs may need to have the quad shocks reversed or removed for proper fitment. Please check for clearance before driving.
- The 1996-2004 spindle can still be easily used, but these will have a slightly different position for the outer tie rod end and may cause bumpsteer in some cases. These will also kick the wheel out around 8mm.
- 1979-93 Mustang (All)
- Must be using 1994-2004 Mustang spindles for correct fitment.
- Steering rack limiters May be needed to eliminate rubbing issues when turning the front wheel.
- 1979-90 Mustang (All)
- Due to smaller front wheel openings, installing wheels or tires that are wider than the factory may require additional clearance on front fenders.
- 1994-04 Mustang Cobra/IRS Equipped (All)
5.0 Resto and SVE Wheel Limited Warranty - Click Here
WARNING: Cancer and Reproductive Harm- www.P65Warnings.ca.gov
